Ground Control Pro + Digitech GSP1101 Issue
Posted: Sat Dec 17, 2011 5:37 pm
It's official... I am a complete Midiot.
I finally received my Digitech GSP1101 and hooked it up via 4 cable method.
I set up a patch with the effects I want to be able to turn off and on with the IA buttons on the GCP.
I copied it 3 times to preset 1, 2 & 3. I can change between them all using the front control of the GSP. Sounds great.
I then set up the GCP to 4 Preset mode and set the IAs to make the FX toggles via CCs.
I set Preset 1 on the GSP to Preset 1 on the GCP. Preset 2 to 2, etc.
I can change the Presets and toggle FXs on and off from the front panel of the GSP. Everything is changing as it should. The first time I turn on Preset 1 via the GCP the patch goes silent.
If I go back to the unit and change to Preset 2 by hand I get sound. Then turn back to Preset 1 by hand- no sound. It's as if it saves it that way.
So know I have 3 Presets that seem to all work the same by looking at the screen (Presets change/ FX turn off and on via IAs) but no sound on Preset 1.
Now if I select Preset 2 - same thing. Sound stops on that Preset. Now if I change by hand on GSP Preset 3 has sound and 1 & 2 do not.
I cannot figure it out. If I go look at the Preset's menus within the GSP all of the settings look the same per Preset.
Does this make sense? Am I missing a setup step on the GCP or GSP that would make this happen?
I finally received my Digitech GSP1101 and hooked it up via 4 cable method.
I set up a patch with the effects I want to be able to turn off and on with the IA buttons on the GCP.
I copied it 3 times to preset 1, 2 & 3. I can change between them all using the front control of the GSP. Sounds great.
I then set up the GCP to 4 Preset mode and set the IAs to make the FX toggles via CCs.
I set Preset 1 on the GSP to Preset 1 on the GCP. Preset 2 to 2, etc.
I can change the Presets and toggle FXs on and off from the front panel of the GSP. Everything is changing as it should. The first time I turn on Preset 1 via the GCP the patch goes silent.
If I go back to the unit and change to Preset 2 by hand I get sound. Then turn back to Preset 1 by hand- no sound. It's as if it saves it that way.
So know I have 3 Presets that seem to all work the same by looking at the screen (Presets change/ FX turn off and on via IAs) but no sound on Preset 1.
Now if I select Preset 2 - same thing. Sound stops on that Preset. Now if I change by hand on GSP Preset 3 has sound and 1 & 2 do not.
I cannot figure it out. If I go look at the Preset's menus within the GSP all of the settings look the same per Preset.
Does this make sense? Am I missing a setup step on the GCP or GSP that would make this happen?