Page 1 of 1
GCX X LIQUID FOOT PRO - HELP ME JOHN !!!!!
Posted: Wed May 30, 2012 2:58 pm
by Marcus
I bought a little Liquid Foot Pro.
I have 3 GCX.
Only one of them is recognized in the settings of the LF.
What should I do to map the other two.
Thank you.
Re: GCX X LIQUID FOOT PRO - HELP ME JOHN !!!!!
Posted: Thu May 31, 2012 10:56 am
by JohnClark
If the Liquid Foot Pro can send MIDI SysEx messages, then you could program it to send a message that will auto-configure each GCX in the system. The SysEx message is as follows:
F0 00 00 07 01 08 10 F7
If you cannot send the SysEx message then you would need custom chips for GCX #2 and #3 that will force them to respond to the different Control Change messages by default. These chips are available direct from Voodoo Lab or through any Voodoo Lab dealer.
I hope this helps!