Switching channels in Mark IV and call presets in G Major 2

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
Angelopes
Posts: 4
Joined: Wed Sep 16, 2009 10:17 am

Switching channels in Mark IV and call presets in G Major 2

Post by Angelopes »

Hi, I bought a Mark IV Rackmount Headand and a G-Major 2.
I will buy a GCP and a GCX to control everything, but a have some doubts.

My question is: Supose i have 4 presets per bank

I can use the GCP and GCX to switching channels (R1, R2 and Lead) control the EQ, Loop and reverb.
1) To do this i will need 6 audio loops in GCX, allright?

The G major 2 are in the Mark Iv loop. GCP midi out -> midi in G major 2
2) Can I call a preset in G major while switching channels?
For example, I want a chorus preset on the clean channel. Delay preset on lead channel. etc..

KINGSFAN
Posts: 4
Joined: Sun May 31, 2009 2:16 pm

Re: Switching channels in Mark IV and call presets in G Major 2

Post by KINGSFAN »

The GCX will work for what you are looking for. I use mine with a Mark IV and G Force. I run my GCP to the midi in on the GCX and then out to the midi in on the G Force.
CURRENT GEAR SET UP
MESA MARK V HEAD
MESA MARK IV RM
MESA MARK SATELLITE RM
MESA SWITCHER
(2) GCX SWITCHERS
G FORCE
DMC GPC
FURMAN POWER CONDITIONER
MESA 12SP SUS 4
(2) MESA 4X12 RECTO CABINETS
(2) MESA 2X12 RECTO CABINETS
MY BALLS
Image

Angelopes
Posts: 4
Joined: Wed Sep 16, 2009 10:17 am

Re: Switching channels in Mark IV and call presets in G Major 2

Post by Angelopes »

Thank you Kingsfan!

Post Reply