Page 1 of 1

Help Routing My New Rig!

Posted: Wed Aug 16, 2017 1:27 am
by Christoffer.N
Hello John! I need some help regarding my new rig!


Stuff I'm going to use:

Diesel VH4 (midi compatible)
JC-120
Mesa Triaxis
Mesa 2:90
G Major 2
2 Pedals
GCX
GCP
Mesa 4x12 one for now. ( 2 mesa 4x12 )


I'm wondering about two type of routing

First: i wanna use triaxis vh4 2 pedals and 2:90? ( My Heavy sound )

Second: Triaxis, 2:90, g major 2 , JC-120 ( Clean Sound )

how to wiring and routing everything i'm a bit lost.

Thx for taking your time!

Best Regards Chris!

Re: Help Routing My New Rig!

Posted: Thu Aug 17, 2017 1:51 pm
by JohnClark
First you will absolutely need two cabs (or one stereo cab) to run one side of the 2:90 and the VH4. The GCX will not switch speaker outputs on these amps.


So the Triaxis is always live, but you basically A/B between the VH4 and the JC120 for heavy or clean tones?
The G-Major 2 is only used with the clean tones, and the two pedals are only used with the heavy tones? What are the two pedals?

Re: Help Routing My New Rig!

Posted: Fri Aug 18, 2017 3:32 am
by Christoffer.N
Hello John! First of all i'm sorry for lack of content!

I was putting all together and finished all the midi programming in the middle of the night and I guess I just stressed out.

I understand that i need two cabs

Yes the triaxis is always live. Thats the routing I need help with/ advise
Yes the G major2 is only used with clean tone.

Well one of em is always on and the other is part time on.

I'm Using a BOSS NS-2 and a KLON replica


basically i want Triaxis (mark IV) comprised with the VH4 and KLON for heavy! (2:90)
(rhythm sound no KLON)

and

Clean tone: Triaxis (mark I), G major2 and JC-120 and off course 2:90

My old setup was: GCX gtr in->GCX-out->GCX-in->NS 2->GCX->EQ-pedal->GCX-out-> Dual Rectifier in->loop send->g major 2->G major 2-out L-Mesa Return, G major2 Out R-> JC-120 Return R. GCX 6,7,8 for controlling channel switching(ch2,ch3 and loop on/off) on my Recto!

Best Regards

Chris

Re: Help Routing My New Rig!

Posted: Fri Aug 18, 2017 10:47 am
by JohnClark
Here is a diagram to try out...
ChristofferNrig.jpeg
This has loops 1 and 2 switching your pedals. Loop 5 is an A/B for the JC-120/VH4. Loop 6 is switching the G-Major 2. (The JC-120 FX Loop should be set to Parallel for this setup.)

Let us know how it goes!

Re: Help Routing My New Rig!

Posted: Fri Aug 18, 2017 11:33 am
by Christoffer.N
Alright! I gonna try it out! thx John! :)


Can you send 2 worksheets as well when I'm only using 1Cab....

One sheet for Clean (triaxis, g major2, jc-120, 2:90)
One for heavy (triaxis,vh4, Boss NS 2, Klon, 2:90)

Best Regards

Chris