Voodoo Lab

I'm considering purchasing a switcher + commander to get my pedals off the floor, into a rack, and be able to program multiple pedals. Looks like a great produce. Currently the path is:Guitar,Tuner,Comp/Sust.,Wah,to Amp Effect Loop Send,Volume,Boost (for my Tele),Chorus,Delay,to AMP Effect Loop Return. I use a Mesa Lone Star. I want to keep the same effect in the amp loop. But can't find anything in the manual, of the Forum on this. Only loops with MIDI. I was looking a the Carl Martin Oct-switch, but the Voodoo Lab gear looks like better gear.

Please help !!!

Given the amount of things to be switched it would seem the easy solution would be two Pedal Switchers. Pedal Switcher #1 would control the front end effects and Pedal Switcher #2 would control the effects loop effects. I hope that helps.

Thanks John, Santa thanks you too !!!

One more thing... Will your Control Switcher run my Mesa 2 channel + reverb ?

Guess I would end up with two Pedal Switcher and a Control Switcher, all controlled by Commander.

I have yet to see a Mesa we can't control.

The Lonestar will use two switches on a Control Switcher... one to A/B the channels, and the other to enable/disable the Solo boost.

Thanks again...
FYI
The Lone Star also has a reverb jack too. I currently control it with a Boss latch switch. I assume the Control Switcher will work for this too.

Keep up the great work. We really appreciate your quick replies.

Sorry, I forgot about the secret hidden Reverb jack. One more Control Switcher switch and you can control that too.

Thanks
Frankly it should not be so "secret". I think Mesa missed the boat on not adding a switch to their channel/solo footpedal.

No matter. Your gear will replace all, and get all that stuff off the floor, AND be able to control with one stomp.

Very Cool.