Help with Whammy Pedal

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
Nova
Posts: 15
Joined: Tue Oct 06, 2009 12:12 am

Help with Whammy Pedal

Post by Nova »

I want to use the expression of my whammy but want to control the on/off with my GC Pro. Can someone help? Thanks!
Top
JohnClark
Posts: 7494
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Help with Whammy Pedal

Post by JohnClark »

The Whammy manual shows the MIDI information needed to set this up. On the Ground Control Pro you will set an Instant Access button to the MIDI Channel that the Whammy is set to and use the Control Change message number for the Bypass control. Information on programming the Instant Access buttons can be found in the Instant Access section under Setup Mode in the Ground Control Pro manual.

Let us know if you run into any troubles!
------------------====Cheers!====------------------
Image
---------==Voodoo Lab Magician & Tech==---------
Top
Post Reply

Return to “Racks, Switching Systems and MIDI”