GCX X LIQUID FOOT PRO - HELP ME JOHN !!!!!

[Marcus]

I bought a little Liquid Foot Pro.
I have 3 GCX.
Only one of them is recognized in the settings of the LF.
What should I do to map the other two.
Thank you.

[JohnClark]

If the Liquid Foot Pro can send MIDI SysEx messages, then you could program it to send a message that will auto-configure each GCX in the system. The SysEx message is as follows:

F0 00 00 07 01 08 10 F7


If you cannot send the SysEx message then you would need custom chips for GCX #2 and #3 that will force them to respond to the different Control Change messages by default. These chips are available direct from Voodoo Lab or through any Voodoo Lab dealer.

I hope this helps!