Newbie PP2+ question

General discussion and tech talk about the industry standard Pedal Power line of power supplies.
Post Reply
BoogieMan
Posts: 1
Joined: Sat Sep 19, 2009 3:52 am

Newbie PP2+ question

Post by BoogieMan »

Hi

I'm kind of lost on the polarity things with pedals. Does anyone have a link that explains the "center negative/positive" thing and "positive tip".

So more specifically, I have this Mr Springgy reverb pedal that I want to power up. It has the following info:

"The pedal operates on a single 9 volt battery; the power supply jack (2.1 mm) on the side of the pedal can be from 9 – 12 vdc at 100 ma or up. The tip is negative "

So in this case I wonder what negative tip means?

JohnClark
Posts: 7494
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Newbie PP2+ question

Post by JohnClark »

When talking about a barrel connector the usual designation would be "Center Negative" or "Center Positive". Some do use the terms "Center" and "Tip" interchangeably. In this case I believe that it is in fact a Center Negative barrel connector. "Tip" is usually reserved for connectors where the end is exposed like on a 1/4" guitar cable or an 1/8" Mini plug.
------------------====Cheers!====------------------
Image
---------==Voodoo Lab Magician & Tech==---------

Post Reply