NEED HELP!!

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
dunn2119
Posts: 2
Joined: Thu Mar 18, 2010 5:58 pm

NEED HELP!!

Post by dunn2119 »

I have just acquired an Alesis Midiverb4 that i am adding to my amp set up. i currently have a Marshall Vintage Modern halfstack and want to also add in a Fender Twin. The questions i have are probably foolish but i am new in the rack world. Could i use the GCP as a AB box to control effects and which amp is being used?

JohnClark
Posts: 7494
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: NEED HELP!!

Post by JohnClark »

The Ground Control Pro alone will not be able to route the audio signals, however with a GCX added you would be able to control the MIDIVerb and simultaneously select which amp is active and even control any switching functions on the amplifiers.
------------------====Cheers!====------------------
Image
---------==Voodoo Lab Magician & Tech==---------

dunn2119
Posts: 2
Joined: Thu Mar 18, 2010 5:58 pm

Re: NEED HELP!!

Post by dunn2119 »

would i still need the GCX if i just wanted to control the midiverb 4 functions alone for now?

JohnClark
Posts: 7494
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: NEED HELP!!

Post by JohnClark »

Only the Ground Control Pro would be needed to control any directly MIDI addressable devices.
------------------====Cheers!====------------------
Image
---------==Voodoo Lab Magician & Tech==---------

Post Reply