Controlling GCX Loops with Lexicon R2

Q & A for building and interfacing your rack gear with Ground Control Pro and GCX-based systems.
Post Reply
jkelly
Posts: 3
Joined: Mon Jul 19, 2010 2:42 pm

Controlling GCX Loops with Lexicon R2

Post by jkelly »

I am curious if I can use midi program change messages from the Lexicon controller to simultaneously control all GCX loops or will it only respond to control change messages?
Thanks!
Top
JohnClark
Posts: 7494
Joined: Tue May 05, 2009 2:33 pm
Location: The Lab

Re: Controlling GCX Loops with Lexicon R2

Post by JohnClark »

The GCX will only respond to Control Change messages on MIDI channel 16.

The Control Change messages for Latching will be 80-87 for Loops 1-8 respectively.
The Control Change messages for Momentary will be 104-111 for Loops 1-8 respectively.

I hope that helps!
------------------====Cheers!====------------------
Image
---------==Voodoo Lab Magician & Tech==---------
Top
jkelly
Posts: 3
Joined: Mon Jul 19, 2010 2:42 pm

Re: Controlling GCX Loops with Lexicon R2

Post by jkelly »

Thank you, John!
Top
Post Reply

Return to “Racks, Switching Systems and MIDI”